Marine Oil Floating Hose
1. connecting discharge facilities of FPSO
2. rated working pressure: 21 bar
3. minimum reserve buoyance: 20% or according to customer requirements
4. electrical continuity: electrical continuous or discontinuous
5. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.
6.cover: PU or rubber
Floating Hose
Self-floating Hose:
The inner layer of the self-floating hose is filled with low-density polymer.
It can make sure the hose emergence above water is not less than 20% of the total volume.
Flange can provide strong connection.
Carcass ply provides strong frame.
More efficient and economical than combined pipeline in the long term.
Dredging Hose
Applications:
Armoured discharge hoses are used on dredging line, suitable for transporting sharp, large and heavy stuff such as coral reef, grit and weathered rock. With build-in wear resistance metal, inner layer have good performance of wear and flexing resistance.
Specifications can be designed by customer requirements.
Features:
Inner diameters up to 1300mm, various lengths and pressure ranges.
Pipe wall thickness range: from 15mm up to 100mm.
Abrasion-resistant and bending –resistant.
It is convenient to install, flexible to use and safe.
Working angle: 0° to 45 °
working temperature: -20°C to 50 °C
Rubber Expansion Joint
Application:
Suction and Discharge Joint are installed between bump on dredger and pipeline connector, which are convenient for installation and removal and to be functioned as reducing vibration and noise. The arch between the flanges ensures the flexibility of the expansion joint.
Flexible, 100% vacuum capability, Anti-wave, Wear-resistance, Weather-resistance, Aging-resistance, seawater resistance
The expansion joint also called bellow and compensater,it can subjected to movements. These movements can vary from very slow (thermal expansion or shrinking movements) to very fast (vibrations),also can be in all directions of axial,lateral and angular.
Rubber Suction Hose
Discharge and suction hoses are suitable for dredger to transport slurry, with wall thickness of 25-60mm, can be used in the temperature of -20℃ to 50℃, have good performance of wear and flexing resistance.
Application:
Discharge and suction hoses are suitable for dredger to transport slurry, with wall thickness of 25-60mm, can be used in the temperature of -20℃ to 50℃, have good performance of wear and flexing resistance.
The suction hoses can be fitted with all the different types of flanges. They can be supplied in any size, and depending on application, with 100% vacuum capabi lity and high implosion pressures.
Jet Water Hose
Jet water hoses are used on drag arms of trailing suction hopper dredger, good performance of flexing resistance and transport pressure retaining. End flanges can be made by rubber or steel.
Application:
Jet water hoses are used on drag arms of trailing suction hopper dredger, good performance of flexing resistance and transport pressure retaining.
End flanges can be made by rubber or steel. Working pressure is 1.5MPa-2.5MPa, ID is 203mm-400mm. Length and specifications can be designed by customer requirements.
Get In Touch
Phone
+86-311-68008303
Mobile:
+86 13393047135
WhatsApp:
+86 13393047135
Add:
No.5-3,Shenxisandong Road, Economic &Technical Development Zone,shenyang, China.