Double Carcass Floating Hose
One End Reinforced Half Floating Double Carcass Hose 1st Off Buoy
One End Reinforced Half Floating Hose Main Carcass:
●Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
●Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
● Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
● Cover: Black Syntetic Rubber Smooth oil and fuel resistant.
● Single Carcass And Double Carcass.
Mainline Full Floating Double Carcass Hose
Mainline Full Floating HoseMain Carcass:
●Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
●Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
● Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
● Cover: Black Syntetic Rubber Smooth oil and fuel resistant.
● Single Carcass And Double Carcass.
Reducer Full Floating Double Carcass Hose
Reducer Full Floating Hose Outer Cover:
● Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.
● Helical Orange strip.
● Polyurethane Orange in Colour cover available on request.
Reducer Full Floating Hose Fittings: End connections built in during manufacture.
ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.
Reducer Full Floating Hose Tests: All tests according to GMPHOM 2009 and Customer detail.
Tail Full Floating Double Carcass Hose
Tail Full Floating Hose Main Carcass:
●Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
●Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
● Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
● Cover: Black Syntetic Rubber Smooth oil and fuel resistant.
● Single Carcass And Double Carcass.
Tanker Rail Barbell Buoyant Double Carcass Hose
1. connecting aft manifold and tail hose
2. lifting lugs should be able to sustain loads, minimum breaking load is 12”=100KN 16”=150KN 20”=200KN
3. rated working pressure: 21 bar
4. minimum reserve buoyance: 20% or according to customer requirements
5. electrical continuity: electrical continuous or discontinuous
6. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution
7.cover: PU or rubber.
Fully Reinforced Buoyancy Control or Neutral Buoyancy Double Carcass Hose
Fully Reinforced Buoyancy Control or Neutral Buoyancy Hose Main Carcass:
●Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
●Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
● Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
● Cover: Black Syntetic Rubber Smooth oil and fuel resistant.
● Single Carcass And Double Carcass.
Get In Touch
Phone
+86-311-68008303
Mobile:
+86 13393047135
WhatsApp:
+86 13393047135
Add:
No.5-3,Shenxisandong Road, Economic &Technical Development Zone,shenyang, China.